WTB - Dimarzio Pickup - Found, Thanks!

felix'apprentice · Post by **felix'apprentice** » Wed Jul 21, 2010 11:45 am

Lookin for a Dimarzio Humbucker - Something like the DP100 Super Distortion. Its goin into a strat - so keep that in mind. Needs to be a bridge position. Thanks!

- kayla.

BloodyFingers · Post by **BloodyFingers** » Wed Jul 21, 2010 11:48 am

If you don't find what your looking for, I have a Duncan/Ibanez I took off my I banez and it sounds really good. 25.00 obo

lonewolf · Post by **lonewolf** » Wed Jul 21, 2010 1:54 pm

Is your guitar routed for a double-wide PAF-sized bridge pickup or a single-coil strat-sized pickup?

If its set up for a single-coil sized pickup, I have that pickup we talked about that's somewhere between a Dimarzio Chopper and Pro Track that will work perfectly in a Strat bridge position for $15.

felix'apprentice · Post by **felix'apprentice** » Wed Jul 21, 2010 2:34 pm

heres the body ... i think it will fit. looks like the only thing i would have to do is modify the pickgaurd to fit

whaddya think jeff?

thanks

- kayla.

Banned · Post by **Banned** » Wed Jul 21, 2010 2:36 pm

felix'apprentice wrote:heres the body ... i think it will fit. looks like the only thing i would have to do is modify the pickgaurd to fit

whaddya think jeff?

thanks

- kayla.

Looks pretty sweet...I'll put you to work when Rock the Walk starts getting more guitar bodies...LOL!!!

felix'apprentice · Post by **felix'apprentice** » Wed Jul 21, 2010 2:37 pm

SkeezerBoy wrote:Looks pretty sweet...I'll put you to work when Rock the Walk starts getting more guitar bodies...LOL!!!

lol thanks, and i will definitely be into helping. and i will build some effects pedals too

- kayla.

lonewolf · Post by **lonewolf** » Wed Jul 21, 2010 2:42 pm

It looks like your guitar is routed to fit a double-coil pickup.

What about your pickguard? are all 3 pickup holes the same size?

felix'apprentice · Post by **felix'apprentice** » Wed Jul 21, 2010 2:43 pm

lonewolf wrote:It looks like your guitar is routed to fit a double-coil pickup.

What about your pickguard? are all 3 pickup holes the same size?

all three holes are the same, i could buy another pickgaurd or mod the one i have.

lonewolf · Post by **lonewolf** » Wed Jul 21, 2010 2:59 pm

felix'apprentice wrote:
lonewolf wrote:It looks like your guitar is routed to fit a double-coil pickup.

What about your pickguard? are all 3 pickup holes the same size?
all three holes are the same, i could buy another pickgaurd or mod the one i have.

The pickup I have will fit right into your pickguard. Its a hot humbucker for the bridge position like you want. I don't have any guitars that it will fit in the bridge position. I tried it in the middle position on my boat paddle and it was too hot for that. Its mint. $15 and its yours.

Humbucker doesn't describe the size of a pickup...it describes a dual-coil design. They make them in both sizes.