Chinese Lighting Manual

Moderators: Ron, Jim Price

Post Reply
User avatar
lonewolf
Diamond Member
Diamond Member
Posts: 6249
Joined: Thu Sep 25, 2003 7:58 pm
Location: Anywhere, Earth
Contact:

Chinese Lighting Manual

Post by lonewolf »

Seriously....

PROFESSIONALLIGHTINGEQUIPMENT==========
Instruction
Thank you very much for your purchasing of our product – LED PAR64 Light. It uses the best lamp-house LED. It is low power and durable (More than 60,000h). It has high brightness and fresh colors. In order to use this product in security, please read the Use Manual seriously.

Operation
It can use the DMX console to control. Or the single puts the correct DMX address (DIP) to function automatically. It also can control the main-light connect the subordinate-light. It has the sound active function. It is used very conveniently.

Attention
1. Please install by the professional.
2. When you don’t use or clean the light, please cut off the power connection.
3. Use the light in the safe location that far from (more than 0.5Meters) the combustible things.
4. Abstain the beam shines the eyes directly, or else hurt the eyes.
5. Don’t charge the circuitry inside the light, or else it is possible to make short circuit or burn. Then it will destroy.
...Oh, the freedom of the day that yielded to no rule or time...
User avatar
CMOR
Gold Member
Gold Member
Posts: 367
Joined: Fri Jun 04, 2004 12:52 pm
Location: Right here.
Contact:

Re: Chinese Lighting Manual

Post by CMOR »

lonewolf wrote: 4. Abstain the beam shines the eyes directly, or else hurt the eyes...

Then it will destroy.
Don't you love English as a 3rd language manuals. Sometimes they read like Shakespeare on Meth, if you're lucky.

Good Luck Jeff!

Steve
It's impossible to know the burdens carried by any man or demons that haunt his steps.
User avatar
Naga
Diamond Member
Diamond Member
Posts: 1160
Joined: Mon Dec 25, 2006 3:47 pm
Location: 'Toona Town, PA

Post by Naga »

Do they mean "Remake Short Circuit"? Or just throw another sequel on after all of these years? That was a good movie :?
User avatar
Ron
Site Admin
Site Admin
Posts: 2034
Joined: Sat Dec 07, 2002 7:03 am
Location: State College, PA

Post by Ron »

I like it when assembly requires "plus" and "minus" screwdrivers.
... and then the wheel fell off.
User avatar
lonewolf
Diamond Member
Diamond Member
Posts: 6249
Joined: Thu Sep 25, 2003 7:58 pm
Location: Anywhere, Earth
Contact:

Post by lonewolf »

Ron wrote:I like it when assembly requires "plus" and "minus" screwdrivers.
roflmao
...Oh, the freedom of the day that yielded to no rule or time...
User avatar
songsmith
Senior Member
Senior Member
Posts: 6108
Joined: Mon Dec 09, 2002 3:15 pm
Location: The Wood of Bells

Post by songsmith »

If no brightness happens, please to be plugging in of the cord. :lol: --->JMS
User avatar
RFBuck
Platinum Member
Platinum Member
Posts: 562
Joined: Sat Aug 23, 2008 11:28 pm
Location: Armagh,PA
Contact:

Post by RFBuck »

Or "please to fork object in minus outlet to current check flow."
Do not meddle in the affairs of dragons, for you are crunchy and taste good with ketchup!
http://www.myspace.com/rfrockspa
Post Reply