previous topic :: next topic |
Author |
Message |
kayla Platinum Member
Joined: 11 Mar 2011 Posts: 615 Location: Central PA
|
Posted: Wednesday Oct 23, 2013 |
|
|
I have a Fender "Evil" Twin. Its a two channel amp with a 25w and 100w setting. I usually keep it on the 25w channel (who needs 100w?). ha but anyways.
i'm tryin to trouble shoot my issue. I've been getting a very high pitched, similar to microphone feedback squeals as soon as i turn on the over drive. I've change my pickups in the guitar, changed guitars, removed pedals and plugged direct and i've still got a squeal every once in a while. It doesn't happen all the time.
The last time i blew a tube it didn't sound like this. The amp just didn't work. So the squealing is confusing. I checked to make sure the tubes were secure. The tubes were changed a few months ago according to the previous owner.
i also check the power supply, thinking we overloaded the circuit (or whatever it is), and didn't fix the problem.
any ideas? i'm thinkin i just need to find a tech to look at it.
thanks!
- kayla. _________________ `( f e n d e r)` |
|
Back to top » |
|
|
StumbleFingers Gold Member
Joined: 26 Apr 2012 Posts: 311 Location: Altoona
|
Posted: Wednesday Oct 23, 2013 |
|
|
It sounds like you may have a microphonic tube - it hasn't completely failed, it's just noisy. You can try a tap test. Tap lightly on each tube with something solid like a pen or a fingernail. If one makes a glassy or metallic sound, swap it out. (I've always done this test with the amp on, which may or may not be foolish.) Or just swap them by trial and error to see which one is the culprit. If you know which preamp tubes are used for the overdrive channel, you can start there.
You might also try lower output preamp tubes if the amp is just noisy by nature. Or it may just need a trip to the shop. _________________ Back in black, I need a snack... |
|
Back to top » |
|
|
tornandfrayed Diamond Member
Joined: 23 Dec 2003 Posts: 1761 Location: The Jaded Empire
|
Posted: Friday Oct 25, 2013 |
|
|
Kayla, I have the old set of tubes that was replaced. I only replaced them because I was not sure how old they were and the guy I bought it from had no idea. If you want them you can stop by and get htem. That way you could have something to swap out. Did the squealing just start? Did you try a different guitar?
Dave _________________ Torn & Frayed
One World, One Voice, One God!
Music is LIFE! |
|
Back to top » |
|
|
kayla Platinum Member
Joined: 11 Mar 2011 Posts: 615 Location: Central PA
|
Posted: Friday Oct 25, 2013 |
|
|
tornandfrayed wrote: | If you want them you can stop by and get htem. That way you could have something to swap out. Did the squealing just start? Did you try a different guitar?
|
ya it just started. i ran it hard from the time i got it from you til now. i've done some research on this particular amp and it seems blowing tubes was one of the reasons it was only in production for a few years. i tried a different guitar, same result. it's just odd, it doesn't happen all the time. couple times i was hitting my over drive to go into a lead and it would start squealing, then one time i went to start a lead and had no volume at all. _________________ `( f e n d e r)` |
|
Back to top » |
|
|
bassist_25 Senior Member
Joined: 09 Dec 2002 Posts: 6815 Location: Indiana
|
Posted: Saturday Oct 26, 2013 |
|
|
Another vote here for a microphonic tube being the culprit. Oftentimes, microphonic tubes will continue to ring after certain notes but will be dead quiet other times. Sometimes tubes will become microphonic with no warning. You'll just plug in one day and will have a bad tube. I had a nice RCA 12AX7 go microphonic in my SVT last winter. That was a depressing day. _________________ "He's the electric horseman, you better back off!" - old sKool making a reference to the culturally relevant 1979 film. |
|
Back to top » |
|
|
Ron Site Admin
Joined: 07 Dec 2002 Posts: 2031 Location: State College, PA
|
Posted: Thursday Oct 31, 2013 |
|
|
Kayla,
If you swap out tubes and the problem remains, it could possibly be that one or more of the tube sockets need to be cleaned, resoldered or retensioned. I used to do tube amp repair many years ago and socket issues were more common than tube failure, especially for amps that spent a lot of time in storage or other less than ideal climates.
I've seen them get so bad that the sockets needed to be replaced.
Here is a link to a socket resoldering/retensioning tutorial.
http://billmaudio.com/wp/?page_id=171 _________________ ... and then the wheel fell off. |
|
Back to top » |
|
|
|