Drive Rack

BloodyFingers · Post by **BloodyFingers** » Sun Jan 25, 2009 1:08 pm

Does anyone on here know how to setup a drive rack. The person that set it up has my Monitor output coming out the high's on the crossover and I would like to set it up so my monitors have full range. I'm not sure how or if you can do this. Any input would be helpful. I will be out this afternnon finishing up the lights and sound system. Please call me if you know how to do this. (312-7706)

lonewolf · Post by **lonewolf** » Sun Jan 25, 2009 7:16 pm

Are you talking about a dbx DriveRack product?

If not, you should just wire bypass the crossover.

If so, you need to select a program for full range with no sub output

OR

you could always set the crossover frequency lower. A good spot would be 10hz below the specified frequency range of your speakers.

onetooloud · Post by **onetooloud** » Sun Jan 25, 2009 8:08 pm

What model drive rack ? I use several dbx as does flood city brass.

BloodyFingers · Post by **BloodyFingers** » Mon Jan 26, 2009 4:00 am

Thanks Guys

rockpage.net

Drive Rack

Drive Rack

Thanks guys